Quality W1.2714 suppliers & exporter - all products made in China.
  • Description
  • Parameter
A HRC 40 prehardened mould steel

W1.2714 is a 40HRC pre-hardened grade for the plastic mould industry, which is characterized by:
• Higher hardness than P20 or W1.2311
• High resistance to wear
• High toughness
• Good polishing properties

The grade is delivered heat treated 360/400 HB.

The steel is melted in and electric arc furnace and refined under high vacuum process (VOD) for efficient deoxidation and desulfurization. This process ensures:
• A precise and consistent chemical analysis
• A very low level of phosphorus and oxygen

The steel is then bottom poured in ingots designed to improve chemical homogeneity during solidification, and cross rolled. Segregates concentrated in the upper part of the ingot are systematically cropped.

• Afnor: 55 NCDV7
• Euronorm: 55 NiCrMo V7
• Werkstoff: W1.2714

Chemical Analysis
Typical values (weight%). Typical Industeel analysis is in accordance with international standards
C S max P max Si Mn Ni Cr Mo V
0.55 .005 .0020 0.3 0.9 1.7 1.1 0.5 0.1

Mechanical Properties
Rp 0.2 Yield Strength Rm Ultimate Strength Elongation
MPa ksi MPa ksi %
40 376 1045 151 1270 184 10

PDF: http://www.industeel.info/wp-content/uploads/2016/01/DS-MOLD-W12714-1.pdf
Contact Us
Sales Manager: Janet Chang
Tel: +86-21-67897511 Fax: +86-21-67897500
Mobile: +86-13774328559
Product Catalog